Analog & SD-SDI Closed Caption Encoder

Model: 8084AD

Keys directly into a 525 line or 625 line component (4:2:2) digital video bitstream
Can add captions, text, web links or Extended Data Service information to previously captioned programs
Individual caption and text data streams can be passed, modified or removed from the incoming video
Support for text insertion from articles stored in the encoders by the captioning software
Support for Extended Data Service (XDS) to encode program information including TSID, CGMS-A and V-chip content advisory ratings

More Product Information Below

Compare

Project List

Product Info

Tech Specs

Documents

The 8084AD is a full broadcast quality Closed Caption Encoder which generates line 21 caption data directly into both analog and digital video feeds. The built-in bypass relay, fault reporting output and optional redundant power supply ensure robust operation. The analog monitor output displays visible captions from any data channel, including many XDS packet types. Closed caption file transfers are supported using Evertz ProCAP® solution. The ProCAP® Transfer Application (PT-SW-LITE + PT-HW-TC) supports offline closed caption file transfer directly to the encoder.

Keys directly into a 525 line or 625 line component (4:2:2) digital video bitstream
Can add captions, text, web links or Extended Data Service information to previously captioned programs
Individual caption and text data streams can be passed, modified or removed from the incoming video
Support for text insertion from articles stored in the encoders by the captioning software
Support for Extended Data Service (XDS) to encode program information including TSID, CGMS-A and V-chip content advisory ratings
V-chip blocking codes selectable from front panel menus
Selectable V-chip default rating after timeout
Bypass relay can be activated by GPI, front panel or automatically on power failure to allow the input video to pass through the unit unprocessed
Three RS-232/RS-422 serial ports allow simultaneous control from three computers, for applications such as in house captioning, XDS insertion and more...
Built in modem interface for dial-up real time captioning. Support for an optional second internal modem
Built-in composite analog monitoring decoders provide real-time verification of encoded data. The decoded captions, text or XDS data is inserted as open captions on the monitoring video outputs
Composite decoders can display these XDS packet types: Network Name, Call Letters, Program Name, Program Length, Time in Show, Program Type, Program Description and Program Rating
Built in test message inserts data into all 9 data channels
Ability to offset the effect of downstream component to composite encoders which add setup to line 21
Monitor mode allows caption data to be read directly from line 21 and output on the serial port
VBI bridge function allows captions to be copied from one video source to another using two 8084 or 8084AD units
GPI input to provide caption shift. This input can control the shift of rows 12 to 15 up to rows 1 to 4 when activated. Intended to provide compliance with FCC order prohibiting obstruction of weather warning text which often appears on the bottom of the s
Can encode captions on lines other than line 21 for specialized applications
EDH Packet checksum correction ensures SDI video integrity to downstream equipment
SMPTE ST 269 fault reporting output
Optional LTC input for setting internal clock
Supports a wide variety of caption software including the following: The Captioning Center - CCSQ and CCMS, Captions Inc. - Smart Encoder V 1.0b, Evertz ProCAP, Cheetah Systems

Decoder or Encoder Signal Type - Video
Decoder/Encoder Type - Caption Decoder/Encoder
Spec Sheet available - Yes

Input Signal Types: Analog & SD-SDI
AC Voltage (Maximum): 240 Volts
AC Voltage (Minimum): 100 Volts
Active Power: 40 Watt
Depth: 18.75 in
Height: 1.75 in
Width: 19 in
Regulatory Compliance: TÜV Listed, Complies with EU Safety Directive, Complies with FCC Part 15 Class A, EU EMC Directive
Serial Digital Video Input Standard: SMPTE ST 259-C
Serial Digital Video Input Number of Inputs: 1
Serial Digital Video Input Connector: BNC per IEC 61169-8 Annex A
Serial Digital Video Input Equalization: Automatic 200m @ 270Mb/s Belden 1694A (or equivalent)
Serial Digital Video Output Standard: Same as input
Serial Digital Video Outputs: 1 program out (bypass relay protected) and 1 monitoring out
Serial Digital Video Output Connector: BNC per IEC 61169-8 Annex A
Serial Digital Video Output Signal Level: 800 mV nominal
Serial Digital Video Output DC Offset: 0V ±0.5 V
Serial Digital Video Output Rise/Fall Time: 470 ps nominal
Serial Digital Video Output Overshoot: < 10 % of amplitude
Serial Digital Video Output Return Loss: > 15 dB
Serial Digital Video Output Wideband Jitter: < 0.2UI
Composite Video Monitor Number of Outputs: 2
Composite Video Monitor Connector: BNC per IEC 61169-8 Annex A
Composite Video Monitor Decoder: 1V p-p composite analog video with open captions
Composite Analog Video Standard: NTSC SMPTE ST 170, PAL ITU-R BT.1700
Composite Analog Video Standard Connectors: BNC per IEC 61169-8 Annex A
Composite Analog Video Standard Input: 75 ohm terminated
Composite Analog Video Standard Output: With bypass relay
Composite Analog Video Standard Preview: Output with open captions

Caption Encoder 82 kb - Data Sheet

Project List