ASI to HD & SD JPEG2000 Decoder Over ASI & IP (Requires Frame Controller for SNMP)

Model: 7880DEC-J2K-2IPASI

1x HD/SD JPEG2000 Decoder
Supports 1080i/59.94, 1080i/50, 1080i/60, 1080p/30, 1080p/30sF, 1080p/29.97, 1080p/29.97sF, 1080p/125, 1080p/25sF, 1080p/24, 1080p/24sF, 1080p/23.98, 1080p/23.98sF, 720p/60, 720p/59.94, 720p/50, 1035i/60, 1035i/59.94, 525i/59.94, 625i/50
Selection of input format (ASI or IP)
Select from multiple inputs(2x ASI and 2x IP)
Handles up to 4 groups of audio (Pass through, no compression)

More Product Information Below

Compare

Project List

Product Info

Tech Specs

Documents

The 7880DEC-J2K-2IPASI is a JPEG2000 SD & HD decoder card which includes Evertz' versatile 3rd generation JPEG2000 codec. It offers user configurable JPEG2000 compression rates on ASI or IP, at better quality, higher rate and lower latency than previous generations. The 7880DEC-J2K-2IPASI is more robust in response to Network IP impairments and is equipped with two IP Data Ports. The 7880DEC-J2K-2IPASI also supports pass-through of up to 4 AES groups (16 channels) of embedded audio. Card functions are controlled via Evertz' VistaLINK® software. The 7880DEC-J2K-2IPASI is an ideal product to decode back-hauled or archived high quality contribution video with ultra low end-to-end delay. The JPEG2000 codec offers superior quality over traditional MPEG compression without the any blocking artifacts. An ideal solution for pristine video and audio contribution.

1x HD/SD JPEG2000 Decoder
Supports 1080i/59.94, 1080i/50, 1080i/60, 1080p/30, 1080p/30sF, 1080p/29.97, 1080p/29.97sF, 1080p/125, 1080p/25sF, 1080p/24, 1080p/24sF, 1080p/23.98, 1080p/23.98sF, 720p/60, 720p/59.94, 720p/50, 1035i/60, 1035i/59.94, 525i/59.94, 625i/50
Selection of input format (ASI or IP)
Select from multiple inputs(2x ASI and 2x IP)
Handles up to 4 groups of audio (Pass through, no compression)
All VANC & HANC passthrough
Dual IP De-Encapsulation with forward error correction support
VistaLINK® control
Compatible with the companion encoder 7880ENC-J2K-IPASI
2 slot card (7 cards per 3RU)

Decoder or Encoder Signal Type - Video
Decoder/Encoder Type - Other
IP Signals Supported - Yes
Spec Sheet available - Yes

Input Signal Types: ASI
IP Signals Supported: Yes
ISO 14001 Certification: No
Output (Decoded/Encoded) Signal Type: HD & SD JPEG2000
Active Power: 29.90 Watt
DC Voltage: 12 Volts
Regulatory Compliance: Complies with FCC Part 15, Class A, EU EMC Directive
Serial Video Output HD: SMPTE ST 292-1, (1080i/59.94, 1080i/50, 720p/59.94, 720p/50) embedded audio
Serial Video Output SD: SMPTE ST 259 (525i/59.94, 625i/50)
Number of Outputs: 4
Connector: BNC per IEC 61169-8 Annex A
JPEG2000 Over ASI Input Standard: ASI DVB TR 101 891-270Mb/s
JPEG2000 Over ASI Number of Inputs: 2 with loopout, Min ASI TS input bitrate 10Mb/s, Max total ASI TS input bitrate 210Mb/s
JPEG2000 Over IP Input De-Encapsulation Parameters: Join Multicast by providing correct messaging using IGMP V2/V3 (SSM Support), Selection of the UDP Ports
JPEG2000 Over IP Number of Inputs: 2
Bitrate Setting: 10 to 100Mb/s for SD, 20 to 210Mb/s for HD
Latency: Max encoder/decoder delay 52ms, Lower latency achieved with +LL option on encoder side
Control: VistaLINK® offers setup and remote monitoring of the card
Number of Slots: 2

Decoder 146 kb - Data Sheet

Project List