Component Analog Video to SDI Converter with 4-Channel Analog Audio Converter/Embedder

Model: 7730ADC-A4

10 bit, 54MHz sampling of input video
Internal processing to maintain 10 bit digital video quality
YPbPr or RGB input support
Black level clamp on all components
User adjustable input video processing functions: black level control on all 3 components, gain control on all 3 -

More Product Information Below

Compare

Project List

Product Info

Tech Specs

Related Products

Documents

The 7730ADC line of component analog video to serial digital converters are broadcast quality A to Ds with an extensive list of additional features. High quality analog to digital conversion of audio inputs can be packaged with the video to create a A to D frame synchronizer with audio embedder. In addition, Evertz fault monitoring processing will analyze and report video and audio problems via an On-Screen-Display, or remotely via VistaLINK® SNMP. The 7730ADC (1 slot module) and 7730ADC-A4 (2 slot module) can be housed in the 1RU 7801FR frame which holds up to four single or two dual slot modules, the 3RU 7800FR frame which has a 15 slot capacity, the portable 3RU 350FR frame which has a 7 slot capacity, or a standalone enclosure which holds a single module.

10 bit, 54MHz sampling of input video
Internal processing to maintain 10 bit digital video quality
YPbPr or RGB input support
Black level clamp on all components
User adjustable input video processing functions: black level control on all 3 components, gain control on all 3 -
components, inter-channel delay control in 18ns increments
Sync on green or separate sync input
300mV or 4V separate sync support
Three input BNCs for YPbPr or RGB input
One sync input BNC for separate sync
Two SDI 525 or 625, 270Mb/s component digital video output WITHOUT OSD text or audio bargraphs
EDH encoding on SDI output
One BNC composite analog reference input (NTSC or PAL-B). 75? or high-Z, jumper configurable input impedance
One frame video synchronizer (with +S option)
Infinitely variable output phase (27MHz clock increments)
Freeze modes: black, freeze, pass
Menu adjustable free running frequency
VU/PPM bargraph level Indicators
Decodes vertical interval time code (VITC) and "burns" the time code into the OSD Monitoring output
A comprehensive on screen display is available to configure the various features of the module
Flexible configuration of the text and audio bar graph information displays
An extensive list of error conditions can be monitored and fault conditions can be configured from these conditions
On screen messages can be triggered by the configured fault conditions
4 balanced analog audio inputs on 2 removable barrier strips
High impedance inputs (user supplies termination resistors for other impedance's)
Analog audio input levels are adjustable. Jumpers set coarse input levels, fine input levels are set by software control
Audio delay equivalent video delay (with +S option)
Additional audio delay of up to 5 seconds
Audio advance of up to 1 frame less 3 microseconds
One group (4 channels of audio) is multiplexed on the outgoing digital video
2 unbalanced AES audio outputs delayed equivalently to the video delay
75 Ohms coaxial (unbalanced) DARS reference input on BNC
Loss of video modes: pass audio, mute audio

Converter Signal Types - Audio & Video
Converter Type - Analog to Digital Converter
Spec Sheet available - Yes

Analog Audio Input - Standard: YPbPr or RGB: SMPTE/EBU N10, Betacam™, MII, and other NTSC related
Analog Audio - Number of Inputs: 1
Analog Audio Input - Connector: BNC per IEC 61169-8 Annex A
Analog Audio Input - Signal Level: 1 V nominal
Analog Audio Input - Frequency Lock Range: ±75ppm from nominal
Analog Audio Input - Control Ranges: Input Level: ±15 %; Black Level: ±5 IRE
Analog Audio Input - Impedance: 75 ohms
Analog Audio Input - Return Loss: > 30dB up to 30MHz
Analog Video Output - Standard: NTSC (SMPTE ST 170), PAL (ITU624-4)
Analog Video - Number of Outputs: 1
Analog Video Output - Connector: BNC per IEC 61169-8 Annex A
Analog Video Output - Signal level: 1 V nominal
Analog Audio Output - Impedance: 75 ohms
Analog Audio Output - Return Loss: > 35dB up to 10MHz
Video Performance - Inter-channel Delay: < ±9 ns
Video Performance - Minimum Delay: 3 µs
Video Performance - Maximum Delay: 1 frame plus 3µs
AES Audio Output - Standard: SMPTE ST 276, single ended synchronous AES
AES Audio - Number of Outputs: 2
AES Audio Output - Connector: BNC per IEC 61169-8 Annex A
AES Audio Output - Sampling Rate: 48KHz synchronous
AES Audio Output - User Bits: Transferred to output in a non-real-time, non-block-contiguous manner
AES Audio Output - Resolution: 24 bits
AES Audio Output - Minimum Input/Output Delay: 2.1 ms
AES Audio Output - Maximum Input/Output Delay: 5 S
Number of Slots: 2
Input Signal Types: Audio, Video
Output (Converted) Signal Type: Audio, Video
Active Power: 20 Watt
DC Voltage: 12 Volts
Depth: 14 in
Height: 1.90 in
Width: 4.50 in
Product Weight: 1.50 lbs
Regulatory Compliance: FCC Part 15 Class A, EU EMC Directive

7730ADC - Component Analog Video to SDI Converter

SDI Component A to D Converter 87 kb - Data Sheet

Project List