The 7707ADVT13-HD is a Analog, SDI or HD Video with AES Audio Fiber Transmitter 1310nm, FP laser. Fully hot-swappable from front of frame with no fiber disconnect/reconnect required. Supports single-mode and multi-mode fiber optic cable.
Single card fiber optic transmitter for one composite analog or SDI video and four analog or AES signals
Auto-sensing (analog or digital) video and audio inputs
Supports 525/625 line component 4:2:2 SDI @ 270Mb/s
Supports HD (SMPTE ST 292-1) video @ 1.485Gb/s
Supports both NTSC and PAL analog, or 4:2:2 component digital video
Supports Analog to Digital and Digital to Analog audio conversion
Broadcast quality analog video and audio performance
Meets or exceeds EIA/TIA RS250-C short haul specifications for analog video and audio transport
Supports 32, 44.1, 48KHz AES audio inputs
Dolby E™ compatible
Adjustable gain equalization for analog video for up to 250m of Belden 1694 coaxial cable
Fully hot-swappable from front of frame with no fiber disconnect/reconnect required
Supports single-mode and multi-mode fiber optic cable
Optical output wavelengths of 1310nm, 1550nm and up to 16 CWDM wavelengths (ITU-T G.694.2 compliant)
DWDM wavelengths (ITU-T G.694.1 compliant) also available
Comprehensive signal and card status monitoring via four-digit card-edge display, or remotely through SNMP and VistaLINK® capability
VistaLINK® capable for remote monitoring via SNMP (using VistaLINK® PRO) when installed in 7800FR frame with a 7700FC VistaLINK® Frame Controller
Fiber Optic Connector Type - Other
Fiber Optic Signals Supported - Other
Spec Sheet available - Yes
Analog Video Input Standard:
NTSC (SMPTE ST 170), PAL (ITU-R 624-2)
Analog Video Input Number of Inputs:
1
Analog Video Input Connector:
BNC per IEC 61169-8 Annex A
Analog Video Input Signal Quantization:
12 bits
Analog Video Input System Bandwidth:
> 5.5MHz
Analog Video Input Level:
2V p-p (maximum)
Analog Video Input Gain Equalization:
Up to 250m of Belden 1694 or equivalent (adjustable)
Analog Video Input Impedance:
75?
Analog Video Input Return Loss:
> 30dB to 5.5MHz
Analog Video Input SNR:
> 70dB
Analog Video Input Differential Gain:
< 1.0%
Analog Video Input Differential Phase:
< 0.7°
Analog Video Input Passband Ripple:
Analog Video Input NTSC:
< ±0.1dB to 4.1MHz
Analog Video Input:
< ±0.2dB to 5.5MHz
Analog Video Input PAL:
< ±0.1dB to 4.8MHz
Analog Video Input Chroma/Luma Gain:
98% to 103%
Analog Video Input Chroma/Luma Delay:
Analog Video Input Line Time Distortion:
0.012
Standard:
Same as Analog Video Input
Analog Video Output Number of Outputs:
1
Analog Video Output Connector:
BNC per IEC 61169-8 Annex A
Analog Video Output Level:
1V p-p
Analog Video Output Impedance:
75?
Analog Video Output Return Loss:
> 30dB to 5.5MHz
Serial Video Output Number of Outputs:
2 (1 loopback, 1 serial)
Serial Video Output Connector:
BNC per IEC 61169-8 Annex A
Serial Video Output Signal Level:
800mV nominal
Serial Video Output DC Offset:
0V ±0.5V
Serial Video Output Rise/Fall Time:
900ps nominal @ 270Mb/s
Serial Video Output:
< 270ps @ 1.485Gb/s
Analog Audio Input Number of Inputs:
4
Analog Audio Input Type:
Balanced analog audio
Analog Audio Input Connector:
12-pin removable terminal block
Analog Audio Input Impedance:
High Impedance (> 20k?)
Analog Audio Input Frequency Response:
±0.1dB, 20Hz to 20kHz
Analog Audio Input THD:
< 0.005%, 20Hz to 20kHz
Analog Audio Input Channel Phase Differential:
±1°