Signal Processing Systems : Distribution Amplifiers : Evertz - 7700DA7-3G

3G/HD/SD-SDI Reclocking Distribution Amplifier

Model: 7700DA7-3G

Normal reclocked mode for SMPTE ST 424 (3Gb/s), SMPTE ST 292-1 (1.5Gb/s) and SMPTE ST 259 (270Mb/s)
Remote selectable non-reclocked mode for all other SMPTE344, SMPTE ST 259, SMPTE ST 310 and DVB-ASI data rates
Fully hot-swappable from front of frame with no BNC disconnect required
Tally output on Frame Status bus upon loss of input signal for quality monitoring
VistaLINK® capable for remote monitoring via SNMP (using VistaLINK® PRO) when installed in 7800FR frame with a 7700FC VistaLINK® Frame Controller

More Product Information Below

Compare

Project List

Product Info

Tech Specs

Documents

The 7700DA7-3G reclocking distribution amplifiers provide inexpensive distribution of your SMPTE ST 424, SMPTE ST 292-1 and SMPTE ST 259 serial digital video signals at rates of 3Gb/s, 1.5Gb/s and 270Mb/s. The DA supports all other all other SMPTE ST 344, SMPTE ST 259, SMPTE ST 310 and DVB-ASI data rates in a non-reclocked mode (540Mb/s, 360Mb/s, 143Mb/s, 19.4Mb/s). Ideal in applications where a large quantity of outputs is required, the DA features an auto-equalized input with seven isolated reclocked outputs. The 7700DA7-3G occupies one card slot and can be housed in the 1RU 7801FR frame which holds up to four single or two dual slot modules, the 3RU 7800FR frame which has a 15 slot capacity, the portable 3RU 350FR frame which has a 7 slot capacity, or a standalone enclosure which holds a single module.

Normal reclocked mode for SMPTE ST 424 (3Gb/s), SMPTE ST 292-1 (1.5Gb/s) and SMPTE ST 259 (270Mb/s)
Remote selectable non-reclocked mode for all other SMPTE344, SMPTE ST 259, SMPTE ST 310 and DVB-ASI data rates
Fully hot-swappable from front of frame with no BNC disconnect required
Tally output on Frame Status bus upon loss of input signal for quality monitoring
VistaLINK® capable for remote monitoring via SNMP (using VistaLINK® PRO) when installed in 7800FR frame with a 7700FC VistaLINK® Frame Controller
SMPTE ST 424 (3Gb/s), SMPTE ST 292-1 (1.5Gb/s), SMPTE ST 259 (270Mb/s) when reclocking
SMPTE ST 344 (540Mb/s), SMPTE ST 259 (360Mb/s, 143Mb/s), SMPTE ST 310 when not reclocking
Return Loss > 15dB to 1.5GHz and > 10dB up to 3GHz
Auto equalization to 80m at 3Gb/s, 140m @ 1.5Gb/s and 350m @ 270Mb/s
7 reclocked outputs
Status LEDs: Detected Signal Rate LED's, Control Mode LED, Module Health Status

Spec Sheet available - Yes

Serial Video Input - Standards (Reclocked Mode): SMPTE ST 424 (3Gb/s), SMPTE ST 292-1 (1.5Gb/s), SMPTE ST 259 (270Mb/s)
Serial Video Input - Standards (Non Reclocked Mode): SMPTE ST 344 (540Mb/s), SMPTE ST 259 (360Mb/s, 143Mb/s), SMPTE ST 310 (19.4Mb/s), DVB-ASI
Serial Video Input - Connector: BNC per IEC 61169-8 Annex A
Serial Video Input - Equalization: Automatic to 80m @ 3Gb/s; 150m @ 1.5Gb/s; 350m @ 270Mb/s
Serial Video Input - Return Loss: > 15dB up to 1.5GHz; > 10dB up to 3GHz
Serial Video - Number of Outputs: 7 Reclocked
Serial Video Output - Connector: BNC per IEC 61169-8 Annex A
Serial Video Output - DC offset: 0V ±0.5V
Serial Video Output - Rise and Fall Time: 150ps @ 3G/HD, 470ps SD nominal
Serial Video Output - Wideband Jitter: < 0.2 UI HD; < 0.3 UI 3G
Voltage: +12V DC
Power: 5 Watts
EMI/RFI: Complies with FCC Part 15, Class A EU EMC Directive
Number of Slots: 1

3G/HD/SD-SDI Reclocking Distribution Amplifier 76 kb - Data Sheet

Project List