1 x 9 Word Clock Distribution Amplifier

Model: 500ADA-W

75 Ohms or high impedance input (jumper selectable)
DA has voltage gain adjustment range from -6dB to +6dB
Outputs can drive into 75 Ohms loads
Card Edge LED's: Module Status/Local Fault, Power Supply Status

More Product Information Below

Compare

Project List

Product Info

Tech Specs

Documents

The 500ADA-W is a SDIF-2 Word Clock distribution amplifier. The input can be configured to be high impedance or terminated to 75 Ohms. The 500ADA-W provides continuous voltage gain adjust from -6dB to +6dB. The module supports a maximum output signal of 5V. The 500ADA-W is housed in the 3RU 500FR frame that will hold up to 16 modules.

75 Ohms or high impedance input (jumper selectable)
DA has voltage gain adjustment range from -6dB to +6dB
Outputs can drive into 75 Ohms loads
Card Edge LED's: Module Status/Local Fault, Power Supply Status

Spec Sheet available - Yes

Number of Inputs: 1
Number of Outputs: 9
Rack Units (Height): 3
Active Power: 1.20 Watt
DC Voltage: 12 Volts
Regulatory Compliance: FCC Part 15 Class A, EU EMC Directive
Standard: SDIF-2 Word Clock
Connector: BNC per IEC 61169-8 Annex A
Level: 0 to 5 V (terminated or unterminated)
Impedance: Selectable 75 ohms (or high impedance)
75 Ohms Load: 5 V
High Impedance Load: 10 V
Minimum Output Level: 0 V
Voltage Gain: -6 to +6 dB
Frequency Range: 28kHz to 100kHz
Number of Slots: 1

Word Clock Distribution Amplifier 38 kb - Data Sheet

Project List