JPEG 2000 Digital Cinema Grade Video over IP Encoder, PoE, HDMI

Model: NMX-ENC-N2122

Input and Output Scaling – Video scaling at either input or output allows seamless switching from any source, at any resolution, to any display or projector, while preserving video fidelity
Power Over Ethernet (PoE) – Eliminates requirement for local power supply and speeds installation. Units can still be powered locally from 12VDC allowing for easy rack-mountable, high-density installations
Infrared (IR) – Infrared emitter connection allows control of low-cost, IR-only display devices
Onboard Control – All N-Series encoders and decoders have on-board, built-in control capability via events that can trigger any number of TCP/UDP commands to other IP controllable devices
Unlimited Scalability

More Product Information Below

Compare

Project List

Product Info

Tech Specs

Documents

OVERVIEW
NMX-ENC-N2122 encode and distribute sources of almost any format onto an existing IP network making that stream available to any endpoint in the facility. Pair with the NMX-DEC-N2222 or NMX-DEC-N2212 Decoder to decode streams back to HDMI or DVI format for display on any monitor. With the ability to direct any source stream to any display, large, low-cost switching and distribution systems are simple to deploy without proprietary cabling or dedicated switching hardware.
Includes IR, serial, balanced audio, two network ports (one POE), and local video pass-through port. Auto-senses analog or digital video in.
The AMX SVSI N2000 Series utilizes JPEG2000 compression for HD, cinema-grade video distribution on the LAN for applications when video quality is top priority. Users can control video quality and bandwidth usage with a simple slider control provided in the web-based user interface allowing each installation to be customized for maximum performance.

Input and Output Scaling – Video scaling at either input or output allows seamless switching from any source, at any resolution, to any display or projector, while preserving video fidelity
Power Over Ethernet (PoE) – Eliminates requirement for local power supply and speeds installation. Units can still be powered locally from 12VDC allowing for easy rack-mountable, high-density installations
Infrared (IR) – Infrared emitter connection allows control of low-cost, IR-only display devices
Onboard Control – All N-Series encoders and decoders have on-board, built-in control capability via events that can trigger any number of TCP/UDP commands to other IP controllable devices
Unlimited Scalability
Pass-Through DVI – DVI interface allows easy installation with local display such as desktop PC applications.
Stand Alone or Card – Available as a standalone device, or card for use with NMX-ACC-N9206
COMMON APPLICATION
- The NMX-ENC-N2122 is the perfect solution for matrix switching and distribution of HD, cinema-grade quality video over LAN. Common applications include enterprise, house of worship, entertainment, and stadiums.

Decoder or Encoder Signal Type - Audio
Decoder or Encoder Signal Type - Video
Decoder/Encoder Type - Digital to Analog Decoder/Encoder
Spec Sheet available - Yes

Operating Temperature (Maximum): 104 F
Operating Temperature (Minimum): 32 F
Certifications: CE, FCC
AC Voltage (Maximum): 240 Volts
AC Voltage (Minimum): 100 Volts
Current Draw: 2 Amps
DC Voltage: 12 Volts
Depth: 5 in
Height: 1.05 in
Width: 7.89 in
Product Weight: 1.60 lbs
Regulatory Compliance: HDCP
Video:
•Digital Video Input: HDMI, DVI-I (through adapter)
•Analog Video Input
•HD-15 VGA, Component
•Component is supported through a passive adapter
•Video Output: Network video over Ethernet via RJ45 port
•Formats
•HDMI, DVI-D (through adapter), Dual-Mode DisplayPort (DP++), HDCP content protection support, RGBHV, YPbPr
•DVI-D and Dual-Mode DisplayPort (DP++) are supported through a passive adapter
Audio:
•Input Signal Types: Embedded audio on HDMI (DVI-D through adapter) or Analog Stereo (Balanced or Unbalanced)
•Output Signal Types: Ethernet
•HDMI Audio Formats: 8ch PCM
•Analog Audio Formats: Stereo 2-channel
•Analog-To-Digital Conversion: 16-bit 32 kHz, 44.1 kHz and 48 kHz
Latency:
•50 ms for 720p60
•140ms for 1080p60
COMMUNICATIONS:
•Ethernet: 10/100/1000 Mbps, auto-negotiating, auto-sensing, full/half duplex, DHCP, Auto IP, and Static IP
•HDMI: HDCP, EDID management
CONTROLS AND INDICATORS – REAR PANEL:
•PWR LED: Same as POWER LED described above
•HDMI LED: On (green) when there is a connection to a valid video source
•STAT LED: Same as STATUS LED described above
•STRM LED: On (green) when the unit is streaming video
Environmental:
•Humidity: 10% to 90% RH (non-condensing)
•Heat Dissipation: Up to ~44 BTU/hr
General:
•Mounting Options:
•Stand alone, surface mount, wall mount, or rack mount
• Surface and wall mounting requires (not included): NMX-ACC-N9101 (FGN9101), Mounting Wings for SVSI N-Series Encoders and Decoders
•Rack mounting requires one of the following (not included):
• NMX-ACC-N9102 (FGN9102), 1RU Rack Shelf for Two Side-by-Side SVSI N-Series Encoders, Decoders and Audio Transceiver
•NMX-ACC-N9206 (FGN9206), 2RU Rack Mount Cage with Power for Six SVSI N-Series Card Units
•Recommended Accessories:
•NMX-ACC-N9382 (FGN9382), 1RU Power Supply 16-Channel 12V for up to 16 SVSI N-Series Encoders and Decoders
•NMX-ACC-N9101 (FGN9101), Mounting Wings for SVSI N-Series Encoders and Decoders
•NMX-ACC-N9102 (FGN9102), 1RU Rack Shelf for Two Side-by-Side SVSI N-Series Encoders and Decoders
•NMX-ACC-N9206 (FGN9206), 2RU Rack Mount Cage with Power for Six SVSI N-Series Card Units

Decoder 717 kb - Data Sheet

Project List

Suggested Products

AV over IP 4K 1Gbps Streaming Transceiver Wall Plate with 2-HDMI In, 1-HDMI Out, RS-232, IR, Audio, LAN, USB 2.0., Black

by Aurora Multimedia Corp.

AV over IP 4K 1Gbps Streaming Transceiver Wall Plate with 1-HDMI In. 1-VGA In, 1-HDMI Out, RS-232, IR, Audio, LAN, USB 2.0., White

by Aurora Multimedia Corp.

AV over IP 4K 1Gbps Streaming Transceiver Wall Plate with 1-HDMI In. 1-VGA In, 1-HDMI Out, RS-232, IR, Audio, LAN, USB 2.0., Black

by Aurora Multimedia Corp.